• July 2010
    M T W T F S S
    « May    
     1234
    567891011
    12131415161718
    19202122232425
    262728293031  
  • Archives

  • RSS snips mag 2

    • Organizers: China HVAC show successful October 19, 2017
      The Sept. 5-7 HVAC construction and plumbing trade show at Shanghai New International Expo Center attracted 17,965 from east and central China, officials said.
    • Danfoss compressor wins AHR Expo award October 18, 2017
      A Danfoss compressor has been given a green HVAC prize in the 2018 AHR Innovation Awards competition.
    • Efforts increase to recruit construction workers October 18, 2017
      For too long, it seems careers that required working with your hands at a job site instead of at a desk have been looked down upon by many people  — including some of those who perform such work.
    • Mestek brings laser cutting to HVAC with new machine October 16, 2017
      Lasers aren’t just for Luke Skywalker and Han Solo. They long ago stopped being just a prop in science fiction movies, although many people may not realize how widespread their use is today.
    • ABC CEO tapped for apprenticeship task force October 16, 2017
      An executive with the Associated Builders and Contractors has been appointed to a White House task force on apprenticeships.
    • HARDI's benchmark programs provide valuable information for industry October 16, 2017
      In a very competitive and low-margin industry like HVACR distribution, it is so crucial to keep tabs on your competitors. But in constantly trying to improve, HARDI members often find themselves asking which aspect of their business they should concentrate those efforts on.
    • Metal roof installed on Air Force military base October 15, 2017
      Longstanding leaks at a U.S. Air Force base clubhouse near Marysville, California, are fixed, thanks to an area mechanical contractor and a metal roof made by McElroy Metal. 
    • HARDI conference gathers HVAC industry up-and-comers October 14, 2017
      Heating, Air-conditioning and Refrigeration Distributors International brought together 92 attendees plus nine mentors at its July Emerging Leaders Conference in Louisville, Kentucky.  
    • Sheet metal adds to store’s facade design October 13, 2017
      A new grocery store in Oak Lawn, Illinois, showcases a modern design featuring materials such as stone, glass and sheet metal. 
    • ABC: Industry needs Trump tax plan October 12, 2017
      Michael D. Bellaman, president and CEO of the group of nonunion contracting firms, said the White House plan to slash corporate and individual tax rates will help his members and the overall economy.
  • RSS snips mag

    • Organizers: China HVAC show successful October 19, 2017
      The Sept. 5-7 HVAC construction and plumbing trade show at Shanghai New International Expo Center attracted 17,965 from east and central China, officials said.
    • Danfoss compressor wins AHR Expo award October 18, 2017
      A Danfoss compressor has been given a green HVAC prize in the 2018 AHR Innovation Awards competition.
    • Efforts increase to recruit construction workers October 18, 2017
      For too long, it seems careers that required working with your hands at a job site instead of at a desk have been looked down upon by many people  — including some of those who perform such work.
    • Mestek brings laser cutting to HVAC with new machine October 16, 2017
      Lasers aren’t just for Luke Skywalker and Han Solo. They long ago stopped being just a prop in science fiction movies, although many people may not realize how widespread their use is today.
    • ABC CEO tapped for apprenticeship task force October 16, 2017
      An executive with the Associated Builders and Contractors has been appointed to a White House task force on apprenticeships.
    • HARDI's benchmark programs provide valuable information for industry October 16, 2017
      In a very competitive and low-margin industry like HVACR distribution, it is so crucial to keep tabs on your competitors. But in constantly trying to improve, HARDI members often find themselves asking which aspect of their business they should concentrate those efforts on.
    • Metal roof installed on Air Force military base October 15, 2017
      Longstanding leaks at a U.S. Air Force base clubhouse near Marysville, California, are fixed, thanks to an area mechanical contractor and a metal roof made by McElroy Metal. 
    • HARDI conference gathers HVAC industry up-and-comers October 14, 2017
      Heating, Air-conditioning and Refrigeration Distributors International brought together 92 attendees plus nine mentors at its July Emerging Leaders Conference in Louisville, Kentucky.  
    • Sheet metal adds to store’s facade design October 13, 2017
      A new grocery store in Oak Lawn, Illinois, showcases a modern design featuring materials such as stone, glass and sheet metal. 
    • ABC: Industry needs Trump tax plan October 12, 2017
      Michael D. Bellaman, president and CEO of the group of nonunion contracting firms, said the White House plan to slash corporate and individual tax rates will help his members and the overall economy.
  • RSS Contracting Business

    • An error has occurred; the feed is probably down. Try again later.
  • RSS Contractor Magazine

    • An error has occurred; the feed is probably down. Try again later.
  • RSS Reed Construction Data

    • An error has occurred; the feed is probably down. Try again later.
  • RSS Tips, Tricks & Resources For MEP Detailers

    • CADmep Videos March 3, 2017
      Fist, if you are looking for Autodesk MEP Videos you can find them here CADmep    Playlist of beginner videos   Plumbing with Jeremy 1 Plumbing with Jeremy 2 CADmep Design Line Luciano    NavisWorks NavisWork 101 – Building Your Model NavisWork 101 – The Basic Tools You Will Be Using NavisWorks 101- Clash Detective NavisWorks 101- Navigation 
      Rob W
    • Navigating In NavisWorks Freedom March 3, 2017
      Rob W
    • Construction Confidence Index April 29, 2014
      Associated Builders and Contractors’ (ABC) Construction Confidence Index (CCI) is a diffusion index that reflects the nation’s construction contractors’ perceptions of the business environment over a six-month period, as well as the prospects for commercial and industrial construction spending growth in the months ahead. Source data are collected from ABC me […]
      Rob W
    • Fabrication CADmep Level & Size Blocks April 22, 2014
      Blocks with attribute definitions can be used to create custom Level \ Size Labels: – attributes for Levels for reference to the Top, Centre or Bottom of Objects – attributes for Size for Object Width, Depth & Diameter READ MORE
      Rob W
    • AutoCAD Super-Duper Click Savers April 15, 2014
      Return on investment on the AutoCAD platform is all about saving picks and clicks and this class is all about exposing the super-secret tools in the AutoCAD platform. The biggest issue is that you don’t know what you are missing from release to release unless someone exposes these little secrets. In this class, we will […]
      Rob W
    • Bluebeam Takeoffs & Estimation February 25, 2014
      Revu includes all of the tools you need to prepare your next bid as much as 70% faster. In this session, you will learn how to useRevu’s built-in measurement tools for takeoffs, save custom measurements in the exclusive Tool Chest™, export measurements to Excel®, and use Custom Columns to add formulas to the built-in worksheet […]
      Rob W
    • Fabrication for MEP: Detailing, Costing, and Fabrication Integration February 21, 2014
      Come and learn about Autodesk® Fabrication software and how the individual systems integrate together to provide more seamless detailing, costing, and fabrication of MEP systems. This class builds on information about design line technology presented in the Go Beyond Design classes. This class will enable you to better understand how this technology, and the […]
      Rob W
    • TSI Training Class Docs February 21, 2014
      Someone shared these with us a while back Its older info but some of it may help Download docs here 
      Rob W
    • CADMep 2013 Plumbing with Jeremy February 20, 2014
      We had Jeremy who has been using CADMep train us on how to get started seeing that TSI or Autodesk does not have any documentation how to get started and training from TSI is only available in Texas or on site but it takes forever to get it set up. Part 1 Part  2 Rob […]
      Rob W
    • Quickly Create a Structural Model with CADmep February 20, 2014
      There are times in the MEP modeling industry that we need to create a structural model and CADmep is a very good tool for this. So let’s take a look at how we can quickly and efficiently build our structural model. (For this example you will need a 2D structural drawing)1. Open your 2D structural […]
      Rob W

Learn more about the Design, Application and Installation of Custom and Standard Pipe Clamps

Learn more about the Design, Application and Installation of Custom and Standard Pipe Clamps right from your computer for free. This technical presentation is this Thursday, July 22, 2010 at 10:00 am or 2:00 pm.
Register for the Design, Application and Installation of
Custom and Standard Pipe Clamps Webinar

The featured presenter, Jerry Godina has over 13 years experience as a support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: